### Autocompleting commands while typing

Texpad has an advanced and configurable autocomplete system capable of autocompleting straightforward commands, autofilling the `\ref`,`\cite` and `\begin` families of commands, and autocompleting custom commands and environments defined via `ewcommand` and `ewenvironment` macros.

## Command autocompletion

Type a standard LaTeX command and a small window will appear next to the cursor with a list of possible completions, and information about the highlighted entry at the bottom of the autocomplete list. You can accept an autocomplete with the Tab key, and dismiss the autocomplete window with the Escape key. Up and down keys will change the selected autocomplete. You can disable autocomplete entirely with the Auto Completion option in the preferences window.

### Autofill command parameters

When typing commands with parameters such as `\cite{}`, `ef{}` and `egin{}`, Texpad will not only help complete the command itself, it will also fill the argument, known as autofill.

Texpad will parse any BibTeX or LaTeX files in your project, looking for `\label`s, `ibitem`s and `.bib` file entries. If you type one of the `ef{` family of commands Texpad will offer all known labels as possible completions.

Texpad knows many other autofills beside these, for example, it will autofill `ibliographystyle{` commands, `\usepackage{` and `egin{` commands, amongst many others.

### Automatching blocks

If you insert a `egin{` command from autocomplete and there is no matching `\end{` command, Texpad will insert one. Texpad will also generate a matching

\end{some environment}

every time you press return on a line with

egin{some environment}

This behaviour can be enabled or disabled with the Automatch `egin` with `\end` option in the Preferences window.

### Auto Indent

When you press return, Texpad will insert an equivalent amount of whitespace as there is at the beginning of the current line. This behaviour can be enabled or disabled with the Auto Indent option in the preferences window.

### Auto itemise

In certain types of environment, e.g. the `itemize` and `enumerate` environments, texpad will insert an `\item` command every time you press return on a line containing an `\item` command

## Configuring Autocomplete

Custom Autocomplete commands are stored in the autocompleted_commands.txt file inside Texpad's Application Support directory. You can open this file in Texpad by clicking the Add/Edit autocompleted commands... menu item in the Texpad menu. Once you have changed this file you must reboot Texpad for the changes to take effect.

This file consists of lines that are either a comment, and autocomplete command or an autofill identity. Their syntax is explained below.

### (a) Comment

The first non-whitespace character in the line should be a `%` symbol. E.g.

% This is a comment line

### (b) Autocomplete

A line that describes a custom autocomplete. This consists of four parts, the first mandatory, the second, third and fourth optional.

#### 1. Key

The first entry should be the autocomplete key. For a regular command this should simply be the command without the preceding slash, e.g. for `\documentclass` write `documentclass`.

For an autofill autocomplete (e.g. `\begin{someenvironment}` or `\documentclass{article}`), write the first stage, followed by a colon, followed by the autocomplete. e.g. `begin:someenvironment` or `documentclass:article`.

Autocompletes will always be sorted alphabetically, but some autocompletes are more commonly used than others and there may be one you wish to prioritise over others. To prioritise an autocomplete, prepend a stars to the key, the more stars, the higher the priority. For example to prioritise `\documentstyle` so that it is selected by default instead of `\documentclass`, add an entry beginning `***documentstyle`. In the case of an autofill complete, place the stars after the colon.

#### 2. Description

To add a description, append a `|` character followed by the description. This description is presented to you in the autocomplete menu when typing the command in the editor.

#### 3. Files it is defined in

To note the file the command has been defined in, write an `@` character followed by a comma separated list of files.

#### 4. Files it is redefined in

To note the files the command has been redefined in, write an `@@` followed by a comma separated list of files.

An example of a simple `\documentclass` command with no description is

documentclass

An example of an environment with a full description is

begin:*fake | description here @ a.tex @@ b.cls, c.sty

An example with multiple placeholders would follow the following syntax

frac | Fraction in math mode E.g. rac{numerator}{denominator}

### (c) Autofill identity

In many cases different commands are autofilled in the same way. For example, `begin` and `end` are autofilled identically. To save you entering the options all again, you can add an autofill identity between, for this example `begin` and `end`. This should begin with an `=`, followed by the new autofilled command, followed by a colon, followed by a fully defined autofilled command (not another identity). There should be no whitespace at all on the line. To return to the `begin` and `end` example, where the autofills have been defined for `begin`, you would write.

=end:begin

This is useful if you have defined a custom referencing command. You could write

=customref:ref

Texpad would autofill when you type `\customref{`.

### Comment/Uncomment

To comment an entire block of text, that is to say stop it appearing in the final document, then select the block and press Cmd-/ to comment it. Pressing Cmd-/ with the same block selected will uncomment.

### Indent/Unindent

If you have a block of text you wish to indent, then rather than pressing tab at the beginning of each individual line, select the entire block of text and press Cmd-] to indent it.

The indented string will be the same as your Tab key would indent. This can be configured in the preferences pane.

You can unindent in the same way with Cmd-[

The indent size may be customised using the Editor tab indent size option in the Editing Aids pane of the Preferences window. You can choose a tab or number of spaces in {1,2,4}.

### Info boxes

Many LaTeX commands are used to create references to other parts of the document, for example `\cite{}`, `ef{}` and `\includegraphics{}`, which reference bibliography entries, labels and image files respectively.

In these cases Texpad is capable of creating a short summary of the referenced entity, which is displayed in the Autocomplete window. It is also displayed over the editor if you place the cursor in the command and wait. For BibTeX entries, Texpad will display as many BibTeX keys as is practically possible, for Labels Texpad will attempt to display the context of the label (section title, etc.), and for images it will show a preview of the included image.

### Snippets

Since version 1.5, Texpad has supported Snippets functionality to make it easy to insert regularly used blocks of text into your document. Texpad is distributed with a small number of helpful Snippets, but the system is fully configurable. You may edit them and/or add your own.

### Usage

To use a Snippet, either choose the Snippet from the dropdown menu, or press the associated hotkey -- all hotkeys are activated with a control key.

### Configuring

All snippets are stored as text files in the Snippets subdirectory of Texpad's Application Support directory. To open this directory, click the Add/Edit Snippets... option from the top of the Snippets menu.

To delete a snippet delete the file and it will be removed when Texpad is rebooted.

To rename a snippet, rename the file containing the snippet. The file extension is ignored, and will not form part of the snippet name.

To add a snippet, either copy the snippet file into the directory, or create a new file in that directory, with the name you want the snippet to carry.

### Syntax

Snippet files are flat text files with a straightforward `key = value` syntax. Lines beginning with a `%` sign are interpreted as comments and ignored. All other lines have a `key = value` syntax.

The key is flattened. That is to say all whitespace, dashes and underscores are stripped and the entire key is rendered into lower case. For example `Ctrl-Key`, `Ctrl key` and `ctrlkey` are all equivalent keys.

If there is no right hand side to the line, then starting with the next line, all lines until the end of the file are used as the value.

An example file follows.

    % A snippet to insert an itemize environment
    ctrl key = z
    group = Environment
    insert at cursor =
    \begin{itemize}
      \item <SELECTION>
    \end{itemize}

### Hotkeys: Key combinations associated with snippets

Keys understood by Texpad are

ctrl key | The value must be a single character. It is the key that when pressed with the control key is the hotkey for this snippet.
group | The name of the group that this should be displayed in
insert at cursor | The text that should be inserted at the current cursor position. Any currently selected text will be substituted for `<SELECTION>` and the new selection will be placed around that text.